Direct Assembly on DIN-Rail. Enclosed and compact housing. Overload protection, constant current limiting. Short-circuit proof, 100% full load burn-in test. Built-in EMI filter, low ripple noise. Plug is available for North America, Europe etc. Simple primary hook-ups, class 2 outputs. No minimum load, no load balancing and no dip switches. Proven reliability at low cost. Additional Options: ATG Electronics QDriver' 60W LED Power Supply is a universal device that operates on input voltage ranging from 85 VAC~264VAC, and provides 5 amperes of filtered and regulated 12VDC power (nominal) or 2.5 amperes of 24VDC power (nominal) to LED lighting fixtures, controllers or decoders etc. QDriver' 60W comes with a 1.5 meter (4.92 feet) long power cord with American plug or European plug to suit different interface. It also has a 1.5 meter (4.92 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board. QDriver' 60W is contained in a compact plastic housing and applicable for dry environment. QDriver' 60W is the ideal and cost effective solution for driving a small quantity of 12VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world. Technical Specifications: Input Voltage: 85 VAC~264 VAC Output Voltage: 12 VDC or 24 VDC Dimension: L120*W60*H40mm (L4.7*W2.4*H1.6 inch) Certificates: Quality Warranty: